The Klaxalarm Terrier is a stand alone, self-contained fire alarm designed for use in small retail, industrial or temporary buildings as well as construction sites, camp sites or marquees. In addition it can be used as a temporary alarm when the main fire alarm system is under maintenance.
Several units can be interlinked to provide additional coverage so that when one call point is activated, all of the other units sound. When fitted with LR14 batteries, these units will operate in standby mode for over 3 years. An audible warning is emitted when the battery power level becomes low.
98dB (A) Sounder Battery operated unit Combined call point and sounder Rugged metal construction Simple to install and operate Units can be linked to form a complete system Low battery warning Resets with a simple key
When combined with a message controller voice sounders can transmit upto 4 messages over the same sounder circuit with no additional wiring.
Message Controller for Fire Alarm Systems
Alert, Evacuate, Test & All Clear messages for each stage of alarm.
Message Controller for Gas Extinguishing Systems
Alert, Gas Release Imminent, Gas Released and Gas Hold messages for each stage of alarm.
Message controllers have two status indication LED’s; a ‘System Health’ indicator which is green in colour and a ‘fault indicator’ which is amber in colour.
Acts as a communication medium between the alarm panel and voice sounders No additional wiring Fully synchronised voice messages System health indicators Simple operation Compatible with any of the Sonos Voice Sounders and the Nexus red LED voice sounder beacon (PNV-0003)
EXPLOSION-PROOF SOUNDER / WATERPROOF / FOR HARSH ENVIRONMENTS / ATEX
The EXD Sounder has been approved for use in potentially explosive atmospheres and very harsh environmental conditions.
The unit incorporates a three stage alarm option with sixty three tones to choose from which includes four tones that can be recorded or customised by the installer. All tones can be pre-set during installation.
The units also have the ability to be fitted with a telephone initiation function and can be used as the second ring output indicator for telephones when installed in very noisy environments.
The design allows for termination inside the enclosure. The sounder is supplied with a mounting bracket as standard.
Approved by ATEX and CQST • IMETRO and IECEX (Pending) ATEX: II 2G Exd IIC T4 - T6 (incorporating IIA & IIB) Zones 1&2, Zones 21&22 (Pending) Conforms to EN (IEC) 60079-0 EN (IEC) 60079-1 and EN54 Volume control Dustproof & Weatherproof
The Exd Bell is designed for use in Zone 1 and 2 areas and for areas requiring a high degree of weatherproof protection. IP66 rated and certified to ATEX II 2G Exd e IIC T6, it can be used in almost any environment.
With a sound output of up to 105dB, it provides a clear signal which stands out against background noise. A telephone ringing version is also available.
The housing is manufactured from glass fibre reinforced polyester with stainless steel fittings designed to cope in arduous conditions. In addition, all DC versions are equipped with a non-wearing electronic contact breaker which gives a long and reliable life. ATEX
Rated for Category 2 use (formerly Zone 1 & 2) ATEX: II 2G Exd e IIC T6 Clear audible signal designed to penetrate background noise Weatherproof to IP66 Rugged construction Choice of voltages
The Syrex IS Sounder is an intrinsically safe alarm sounder which provides an audible warning signal in hazardous area applications.
With three alarm stages and a low current consumption, the Syrex IS Sounder is ideal for both fire and process control applications.
The Syrex IS Sounder needs to be used with a galvanic isolator specified by the system certificates.
Rated for Category 1 ATEX approved EX II 1G EEx ia IIC T4 Choice of 49 tones Choice of lens colours Auto synchronised sound output ABS flame retardant UL94V0 & 5VA housing Weatherproof to IP65 Volume control Voltage 6-28V DC
Beacon with the TimeSaver base, connections are made to the base during the initial wiring phase which results in faster and more reliable installation. The beacon head ‘twists and clicks’ into the base on commissioning, avoiding the wiring and connection problems associated with traditional alarm devices.
Deep base units have weatherproof protection to IP65 and can be used in all locations both indoors and outdoors.
The Sonos Beacon utilises a full faced, translucent case which provides a much larger lens area and a greater spread of light.
Sonos Beacon units have a deep or shallow red colour base as standard and are available with a red or amber lens.
2J Xenon beacon or high efficiency LED beacon Simple ‘First Fix’ installation (no second fix wiring) Weatherproof to IP65 (deep base units) Synchronised flash White base option