-500x500.jpg "Test Stand PCE-DLT 10")
-500x500.jpg "Test Stand PCE-DLT 10")
Test Stand PCE-DLT 10
Need Technical Support?
Our engineers are available to help you select the right module for your application.
Description
Description
Test Cabinet for Damp Tests / based on AMK-MB-005 /
automatic test sequence/ for up to 5 test pieces
With the evaporation cabinet PCE DLT 10, the water vapour resistance of samples is tested according to AMK-MB-005 Issued on 04/2015 Humidity and Climatic Resistance Test Module 1 (water vapour loading). This test simulates the conditions of cooking hobs or dishwashers. The samples to be tested are vertically suspended in the narrow area of the PCE DLT 10 material test chamber. Then you have to steam the sample for 3 cycles of 30 minutes and leave it to dry for 30 minutes outside the device. After the test, the samples are to be assessed visually and haptically for damage such as swelling, joint formation and detachment. The aim of this test with the evaporation cabinet PCE DLT 10 is to prevent any swelling, joint formation or edge / film detachment on the test piece. The quality of the joint determines the component quality. A closed joint prevents the penetration of moisture.
Highlights
- Max. 5 test specimens
- Automatic test sequence with constant temperature
- Data logger
- Good-bad indication of temperature
- Determination of moisture expansion
- Checking of joint formation and edge release
Specification
| Test method | Based on AMK-MB-005 (04/2015) |
| Temperature control range | automatic 50 ... 52 °C |
| Heating capacity | 3000 W |
| Measurement display | Colour Touch LCD |
| Measurement memory | 1.5 GB (> 1 million measured values) |
| Storage rate | max. 10 Hz (adjustable) |
| Interface | USB (for USB stick) Ethernet (optionally selectable) |
| Temperature sensor | PT100 class A 4 conductors |
| Power supply | 230 V AC / 50 Hz |
| Dimensions | 1130 x 720 x 690 mm |
| Weight | ca. 36 kg |
