-500x500.jpg "Hygiene Tester PCE-IR 80")
-500x500.jpg "Hygiene Tester PCE-IR 80")
-500x500.jpg "Hygiene Tester PCE-IR 80")
Hygiene Tester PCE-IR 80
Need Technical Support?
Our engineers are available to help you select the right module for your application.
Description
Description
Hygiene Tester for non-contact and contact measurement / Up to 330°C (626°F) / Probe made of stainless steel / Simple operation
The Hygiene Tester PCE-IR 80 is used to quickly control the temperature of food. The Hygiene Tester is used in the area of canteen kitchens, catering services, refrigerated warehouses and warehouses. The Hygiene Tester has two types of measurement. On the one hand, the PCE-IR 80 Hygiene Tester can measure the temperature of the object without contact via infrared. Here the measuring range is -35 ... 330°C / -31 ... 626°F. The emissivity of the Hygiene Tester is adjustable, so that always best measuring results can be achieved.
On the other hand, the Hygiene Tester has a stainless steel needle sensor, so that the meter can also be used as a puncture, Hygiene Tester. If the core temperature is measured by this method, the Hygiene Tester can measure in the range between -20 ... 260°C / -4 ... 500°F. The unit of the penetration thermometer can be switched between °C and °F. The fast response time of 10 ms and high resolution of 0.1°C / 1.8°F complete the scope of the Hygiene Tester. The thermometer is supplied with a CR2032 battery.
Highlights
- Non-contact and contacting temperature measurement combined in one measuring device only
- Large measuring range
- Suitable for use in the food industry according to HACCP
- Emissivity adjustable (pre-set for food)
- Low response time
- Measurement hold function (Min./Max.)
- Continuous measurement function
- Waterproof, thus simple hygienic cleaning (flushable housing)
- Large measuring range
- Suitable for use in the food industry according to HACCP
- Emissivity adjustable (pre-set for food)
- Low response time
- Measurement hold function (Min./Max.)
- Continuous measurement function
- Waterproof, thus simple hygienic cleaning (flushable housing)
Specification
| Measurement type infrared | |
| Measuring range | -35 ... 330°C / -31 ... 626°F |
| Resolution | 0.1°C / 0.18°F |
| Accuracy | -35 ... 0°C / -31 ... 32°F : ± 4°C / 7.2°F > 0°C / 32°F : ± 2% of rdg. ± 2°C / 3.6°F |
| Type of measurement Penetration sensor | |
| Measuring range | -20 ... 260°C / -4 ... 500°F |
| Resolution | 0.1°C / 0.18°F |
| Accuracy | ± 1% of rdg. ± 1.5°C / 2.7°F |
| Optical resolution | 4: 1 |
| Emissivity | Adjustable 0.1 ... 1.0 |
| Response time | 10 ms |
| Spectral | 8 ... 14 μm |
| Power supply | 3.0V CR2032 battery |
| Operating conditions | 0 ... 50°C / 32 ... 122°F, max. 80% rh |
| Weight | About 100 g / < 1 lb |
| Dimensions | 151 x 41 x 20 mm / 6 x 1.6 x 0.8 in |
| |
