Material Tester PCE-CT 29-ICA incl. iso calibration certificate
Need Technical Support?
Our engineers are available to help you select the right module for your application.
Description
Description
Material tester with a measuring range of 0 ... 2000 µm / Micro-USB /
statistics function / limit value alarm function / temperature and moisture measurement / V-groove
Software for transferring the measured values
The Material tester has a measuring range of 0 ... 2000 µm. The Material tester can measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals. For a better analysis of the measurements, the coating thickness gauge has a measuring function based on the SSPC standards. With this function, the corrosion protection of a coating can be checked with the Material tester.
The Group function stores the measured values directly on the Material tester. A memory of 50 groups with 50 measurements each is available on the Material tester. In each group, statistics are created for all measured values from the Material tester. All measurement data and statistics can be recalled after a measurement run on the Material tester.
For further analysis of the measured values, the Material tester can be connected to a PC. The Material tester has a micro-USB interface for this purpose. The software can be used to transfer the measurement data from the Material tester to a PC. In addition, it is possible to carry out live measurements with the Material tester using the software. For further processing of the measured values from the Material tester, they can be exported in CSV and XLS format via the software.
In addition to the coating thickness measurement, the Material tester can measure the temperature and humidity of the environment. Thus, the Material tester can be used to find out whether the climatic conditions are right to carry out further processing on the coating.
With the V-groove, the coating thickness of, for example, pipes can also be determined with the Material tester.
Highlights
- Measuring range 0 ... 2000 µm
- with SSPC measuring function
- Individually adjustable limit value alarms
- Data memory with up to 2500 measured values
- temperature and humidity measuring function
Specification
| Measurement on ferrous metal (Fe) | |
| Measuring range | 0 ... 2000 µm |
| Resolution | 0.1 µm @ 0.0 ... 99.9 µm |
| 1 µm @ 100 ... 2000 µm | |
| Accuracy | ±(2 % ±2 µm of Mw.) |
| Repeatability | ±(1 % ±1 µm of Mw.) |
| Smallest radius of curvature | 1.5 mm |
| Smallest measuring area | Ø7 mm |
| Smallest layer thickness | 0.5 mm |
| Measurement on non-ferrous metal (NFe) | |
| Measuring range | 0 ... 2000 µm |
| Resolution | 0.1 µm @ 0.0 ... 99.9 µm |
| 1 µm @ 100 ... 2000 µm | |
| Accuracy | ±(2 % ±2 µm of Mw.) |
| Repeatability | ±(1 % ±1 µm of Mw.) |
| Smallest radius of curvature | 3 mm |
| Smallest measuring area | Ø5 mm |
| Smallest layer thickness | 0.3 mm |
| Temperature | |
| Measuring range | 0 ... 50 °C / 32 ... 122 °F |
| Resolution | 0.1 °C / °F |
| Accuracy | ±1.2 °C / ±2.2°F |
| Humidity | |
| Measuring range | 0 ... 100 % r. h. |
| Resolution | 0.1 % r. h. |
| Accuracy | ±3.2 % r. h. @ 20.0 ... 70.0 % r. h. |
| ±4.0 % r. h. @ 0.0 ... 19.9 % r. h. | |
| ±4.0 % r. h. @ 70.1 ... 100.0 % r. h. | |
| Further specifications | |
| Base material for measurements Ferrous (Fe) and non-ferrous (NFe) metals | |
| Display | 2.4 " LC display |
| Automatic display orientation | 0, 90, 180 and 270 °, can be switched off |
| (only measuring window) | |
| Statistic functions | average, highest, lowest and SDEV measured value |
| Measuring modes | direct, groups, SSPC |
| Units | µm, mm, mils, inch |
| Power supply | 2 x 1.5 V AA batteries |
| Interface | Micro-USB (for data transfer only) |
| Alarm | signal tone and / or LED signal light in case of |
| Exceeding of the adjustable upper and lower alarm limit | |
| Switch-off | Off, 30 seconds, 1 minute, 5 minutes |
| Menu languages | English, German, French, Spanish, |
| Italian, Portuguese, Chinese, Japanese | |
| Operating conditions | 0 ... 50 °C, 20 ... 90 % r.h., non-condensing |
| Storage conditions | -10 ... +60 °C, 20 ... 90 % r.h., non-condensing |
| Dimensions | 35 x 64 x 137 mm |
| Weight | 175 g |
Delivery Scope
1 x Material thickness gauge PCE-CT 29-ICA
1 x set of standard foils
1 x carrying case,
1 x calibration plates (Fe and NFe)
1 x mass data storage
2 x 1.5 V AA battery,
1 x instruction manual
1 x ISO Calibration Certificate
1 x ISO Calibration Certificate
