Street lighting cut outs - Titan

The Titan2 street lighting cut out is supplied as standard with many class-leading features that make the installer’s task considerably easier. High quality engineering thermoplastics make the Titan2 range of street lighting cut outs the ideal choice to withstand heavy use in demanding locations

Trojan2 midi isolator

ntroducing the Trojan2 Midi, 2/3 way modular street lighting isolator system.

Meticulous attention to detail results in the compact dimensions of the Trojan2 range of street lighting isolators. Equipped with a 32A DP isolator and a 25A fuse carrier featuring an interlock device that automatically slides over the fuse carrier(s) when the isolator is moved to the ON position ensuring that a fuse carrier cannot be opened with the circuit energised. Both the Lucy isolator and the Lucy fuse carrier have been third party tested at KEMA laboratories to their relevant standards. A removable blank enables an extra module to be incorporated if desired

Trojan mini

Built with ease of installation foremost in mind, the Trojan Mini street lighting isolator has surprisingly generous cabling access for a product of its size. Able to accept a variety of cable types and terminations, the Trojan Mini street lighting isolator can also be supplied pre-wired with connection leads to reduce on-site installation time

Trojan maxi

The Maxi is the largest street lighting isolator enclosure in the Trojan portfolio. Just like the Mini and Midi variants, the Maxi carries the same high specification equipment but with the increased versatility that 4 modules gives.

Trojan festive unit

Based on the Trojan Maxi enclosure, the Festive Lighting Unit accepts up to 4 DIN modules which the Customer is free to specify. Typical configurations include a combination of MCBs, RCBOs, RCDs, time clocks and contactor modules in addition to the more conventional isolating switches and fuse holders.

SLF2

ZEBC - Electronic Gear for discharge lighting

ZEBC Electronic Ballasts provide:

• Assured power factor correction for life
• Automatic lamp detection, suitable for metal Halide, high pressure sodium lamps
• A separate Cosmopolis range is also available
• Interoperable product through Vizion enabled Central Management Systems (CMS) and other Lucy Zodion control products
• Use as stand alone ballast or integrate Vizion CMS system
• Diverse management capability when incorporated within Vizion CMS system
• Stable power output over full operating voltage range
• High efficiency ensures significant reduction in energy consumption
• Can be fitted as a single stand-alone unit now and then incorporated into the Vizion system at a later date

ZLED150 LED Driver

Lucy Zodion's premium high power 150W dimmable driver for LED street lights. The ZLED driver is designed for use either as a stand-alone unit or for integration into any WiMac or DALI central management systems. Access to the extended features of the ZLED driver is gained by connection to a WiMac / DALI CMS. Avaliable in standard options of 350mA, 500mA and 700mA. Standard form factor design permits easy fitment within a large range of street lanterns

ZEDA LED Drivers

The ZEDA driver sits at the centre of your control options. The driver can be controlled by a standard photocell, a dimming photocell (SS20), a Part Night Dimming Module (plugged into the WiMAC port) or a Vizion CMS node. This gives the user the flexibility to use the driver in a number of different and upgradable ways

Reflect Relay

Typically, the majority of lighting on signposts and bollards are continually on throughout the day and night. Take the ‘Keep Left’ bollard on a traffic island, by powering the bollard through a Reflect Relay the bollard will turn off during the day, saving on average over a year, twelve hours of energy per day. Flexible in application, the Reflect Relay can also be used to extend the switching capability of any switching device whether that extension is as an extra output, a volt-free signal or to add additional switching power. Small in size, retrofittable in minutes and without changing any wiring at the photocell makes the Reflect Relay install simple, safe and cost-effective.